MAIN APPLICATIONS
Medium and high pressure hydraulic lines with installation constraints, pilot lines, return, drain, and suction lines
CONTINUOUS SERVICE TEMPERATURE RANGE
-40°F / +212°F
-40°C / +100°C
RECOMMENDED FLUIDS
Mineral oils, vegetable oils and synthetic ester-based oils
(up to 212°F I 100°C), glycols and polyglycols, mineral oils in aqueous emulsion, water
TUBE: Synthetic rubber
REINFORCEMENT: Two wire braids
COVER: High abrasion resistant synthetic rubber
APPLICABLE SPECS: ISO 18752 Grade A, SAE J517 Type 100 R19
TYPE APPROVALS: MSHA, GOST-R
KEY PERFORMANCE
Extreme abrasion resistance • Approved at 200.000 impulse cycles, 133% WP at T=100°C (ISO 18752 Grade A) • Very low bend radius to suit restricted space installations • High robust and compact hose structure compared to rated pressure • High environmental agents resistance • Vacuum resistance according to SAE 100R4 requirements
 |
 |
 |
 |
 |
 |
 |
 |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PART REF. | HOSE SIZE | R.O.D. | O.D. | MAX W.P. | BURST PRESSURE |
MIN. BEND RADIUS |
WEIGHT | MF3000 FITTING |
MF2000 FITTING |
||||||||
| DN | dash | inch | mm | inch | mm | inch | bar | psi | bar | psi | mm | inch | g/m | lb/ft | |||
| Gl28-04 | 6 | -4 | 1/4″ | 11.6 | 0.46 | 13.2 | 0.52 | 280 | 4060 | 1120 | 16240 | 50 | 1.97 | 260 | 0.17 | OPB | MF+M03400-04 |
| Gl28-05 | 8 | -5 | 5/16″ | 12.9 | 0.51 | 14.5 | 0.57 | 280 | 4060 | 1120 | 16240 | 55 | 2.17 | 280 | 0.19 | OPB | MF+M03400-05 |
| Gl28-06 | 10 | -6 | 3/8″ | 15.4 | 0.61 | 17.0 | 0.67 | 280 | 4060 | 1120 | 16240 | 63 | 2.48 | 380 | 0.26 | OPB | MF+M03400-06 |
| Gl28-08 | 12 | -8 | 1/2″ | 18.5 | 0.73 | 20.3 | 0.80 | 280 | 4060 | 1120 | 16240 | 80 | 3.15 | 495 | 0.33 | OPB | MF+M03400-08 |
| Gl28-10 | 16 | -10 | 5/8″ | 22.7 | 0.89 | 24.7 | 0.97 | 280 | 4060 | 1120 | 16240 | 90 | 3.54 | 730 | 0.49 | OPB | MF+M03400-10 |
| Gl28-12 | 19 | -12 | 3/4″ | 27.1 | 1.07 | 29.3 | 1.15 | 280 | 4060 | 1120 | 16240 | 120 | 4.72 | 1060 | 0.71 | OPB | MF+M03400-12 |